Scaffolding Base Plate Manufacturer & Supplier in UAE

Scaffolding base plates in the UAE are available in three standard sizes: 150×150mm (the most common and minimum code-compliant size), 200×200mm (for medium to heavy-duty applications), and 250×250mm (for heavy-duty and industrial applications). Plate thicknesses range from 5mm to 20mm, with 6mm being the minimum required by safety codes and 12–20mm recommended for heavy-duty industrial scaffolding. Spigot tube diameters are typically 38mm OD or 48.3mm OD. Zero Point Interiors manufactures all standard and custom sizes.

We manufacture four main types: Fixed Base Plates with a non-adjustable spigot for level surfaces; Adjustable Base Jacks (Screw Jacks) with threaded spindles allowing height adjustment up to 600mm; Swivel Base Plates with pivoting spigots for sloped surfaces; and U-Head Jacks with U-shaped forks for gripping timber formwork beams. All products are available in painted, electro-galvanized, or hot-dip galvanized finishes and are compatible with Cuplock, Ringlock, Kwikstage, H-Frame, and tube-and-clamp scaffolding systems.

Our base plates are universally compatible with all major scaffolding systems used in the UAE and GCC: Cuplock scaffolding (the most widely used in the Middle East), Ringlock (Rosette) scaffolding, Kwikstage scaffolding, H-Frame scaffolding, and traditional tube-and-clamp scaffolding. Our standard 48.3mm OD spigots fit directly into scaffold standards across all these systems. We also manufacture 38mm OD and 60mm OD variants for specific system requirements.

Our base plates are manufactured from Q235 or Q345 carbon steel. Q235 has a yield strength of 235 MPa for standard applications, while Q345 offers 345 MPa for heavy-duty use. Spigot tubes are ERW steel conforming to EN 10219 with 3.2mm to 4.0mm wall thickness. We use only certified raw materials with mill test certificates for full traceability and project compliance.

A fixed base plate has a non-adjustable spigot welded to a flat plate for level surfaces. An adjustable base jack has a threaded spindle with a rotating jack nut allowing height adjustment up to 600mm — essential for levelling scaffolds on uneven ground. Most scaffold erectors carry both types: fixed plates for concrete or level ground, and adjustable jacks for irregular surfaces. Adjustable jacks cost more but provide crucial versatility on real-world construction sites.

Base plates used in the UAE must comply with BS 1139 and EN 74 for testing and performance, ISO 9001 for manufacturing quality, Aramco GI 8.001 mandating minimum 150×150mm and 6mm thick base plates, ADNOC Codes of Practice, and OSHA standards. Zero Point Interiors manufactures all products to meet or exceed these requirements, with third-party test reports available on request for project submittal packages.

We offer four finishes: Painted (red oxide or enamel) for basic protection; Electro-galvanized for moderate environments; Hot-dip galvanized (HDG) for maximum corrosion resistance in marine and coastal conditions; and Powder-coated for professional appearance on rental fleets. HDG is most popular in UAE due to coastal humidity and salt air exposure.

Yes, we specialize in custom fabrication using fiber laser cutting and robotic welding. Custom options include non-standard plate dimensions, increased thickness, extra bolt holes for ground anchoring, special spigot sizes for proprietary systems, and bespoke surface treatments. We work from your drawings and can provide samples before full production. Minimum order for custom work is just one piece.

Standard orders are completed in 3–5 working days. Rush orders can be processed in 24–48 hours. Large production runs of 5,000+ pieces require 7–14 working days. We deliver throughout all seven Emirates. This is significantly faster than imported base plates requiring 45–60 days shipping time from China or India.

There is no minimum order quantity. We accept single-piece prototype orders, small batches of 50–100 pieces for smaller contractors, and large production runs of 10,000+ pieces for scaffolding rental companies and major construction projects. Bulk orders receive significant volume discounts.

Yes, we supply base plates for oil and gas projects compliant with Aramco GI 8.001 and ADNOC codes. We provide full documentation including mill test certificates, third-party weld inspection reports, dimensional inspection reports, and surface coating certificates for project compliance packages and safety submittal requirements.

Pricing depends on plate size, thickness, spigot type, surface finish, and order quantity. As a local manufacturer, we offer competitive pricing with the advantage of fast turnaround and full traceability. Bulk orders receive volume discounts. Contact us on WhatsApp at 056 686 4001 for an accurate quote within hours.

A standard 150×150×6mm Q235 steel base plate can support loads of 20–40 kN (approximately 2,000–4,000 kg) on solid concrete. Larger plates distribute weight over a greater area for higher total loads on softer ground. Plates of 12–20mm thickness with Q345 steel provide enhanced capacity for heavy-duty industrial applications. The actual safe working load depends on the complete scaffold design as calculated by a competent scaffold engineer.

A base plate is a steel component with a spigot that connects directly to the scaffold standard. A sole plate (or sole board) is a timber or steel plank placed underneath the base plate on soft or uneven ground to further distribute the load over an even wider area. Sole boards must be a minimum of 450×225×35mm as per standards. On firm concrete surfaces, sole boards may be omitted, but base plates are always mandatory. The two work together as part of the scaffold foundation system.